highaltitude.log.20150101

[00:00] <gonzo_nb> ah, that will be why it sounds like the somme outside
[00:00] <SpacenearUS> 2015! Happy new year everyone!
[00:02] <Lunar_Lander> happy new year to everyone :)
[00:03] <Lunar_Lander> the screenshots you just linked
[00:16] <jarod> Lunar_Lander: http://x264.nl/dump/longwave_off_air_planned.txt
[00:16] <mfa298> gonzo_nb: it's been sounding like the somme for a while around here. I think some locals are still using BST (either that or their clocks were very fast)
[00:16] <jarod> ah, i see now, mispaste channel :)
[00:16] <Lunar_Lander> cool! :)
[00:18] <fsphil> there we go, 2015
[00:18] <Lunar_Lander> yea
[00:20] <fsphil> mfa298: hehe yea, heard a few fireworks at 23:00
[00:21] <fsphil> oops
[00:21] <mfa298> watching BBC1, now that's a more interesting way to hear bag pipes for new year :)
[00:22] <fsphil> best way to listen to bagpipes is on mute
[00:23] <mfa298> considering it was a Queen track that normally only starts with percussion that was surprisingly good!
[00:23] Kodar_ (~Kodar@ham4.cc.fer.hr) left irc:
[00:23] <DL7AD_> gn
[00:23] <fsphil> queen with bagpipes, ok that might actually be alright
[00:25] <SpeedEvil> I doubt she can play
[00:28] <fsphil> someone plays bagpipes every morning outside her window. worlds most annoying alarm clock
[00:28] <mfa298> I doubt she sings "We will rock you" either
[00:29] <mfa298> although it's not impossible to imagine her singing "we are the champions", although that may have done better in the empire years.
[00:30] KingJ_ (~kj@2001:bc8:3533::3) joined #highaltitude.
[00:31] <fsphil> "we will we will rule you"
[00:31] <fsphil> just america to go now
[00:32] <fsphil> then the whole planet is syncronised
[00:34] guido_ (~guido@s5596f950.adsl.online.nl) left irc: Quit: This computer has gone to sleep
[00:36] KingJ (~kj@2001:bc8:3533::3) got netsplit.
[00:37] Nick change: Maxell_ -> Maxell
[00:38] <jededu> Yay EDUPIC11 :)
[00:39] <jededu> Its on 10 min transmissions now thanks SA6BSS
[00:40] <daveake> https://pbs.twimg.com/media/B6OWthkCEAAT20C.jpg
[00:46] KingJ (~kj@2001:bc8:3533::3) got lost in the net-split.
[00:46] <fsphil> and so continues our misplaced faith in gravity
[00:46] <Darkside> >_>
[00:46] <Darkside> but...
[00:46] <Darkside> troll
[00:47] <fsphil> think it was a line from H2G2
[00:49] <fsphil> oh no, third rock from the sun
[00:50] vukcrni (~lupogriso@li607-220.members.linode.com) left irc: Remote host closed the connection
[00:52] <Lunar_Lander> yay
[00:53] <arko> happy new year #highaltitude :)
[00:54] vukcrni (~lupogriso@li607-220.members.linode.com) joined #highaltitude.
[00:56] <chrisstubbs> Happy new year all
[01:01] <Lunar_Lander> happy new year chrisstubbs :)
[01:02] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) joined #highaltitude.
[01:02] <fsphil> keep an eye out for a delorian
[01:02] <arko> lol
[01:03] <daveake> I got the "Haynes Manual" deLorean t-shirt :)
[01:04] thoren (~ghz@darkdata.org) joined #highaltitude.
[01:04] <daveake> If my chase car ever appears to be doing 88mph, worry
[01:05] <fsphil> wonder if they convert it to 141km/h for the french dub
[01:06] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) left irc: Ping timeout: 265 seconds
[01:08] <daveake> Talking of literal translations ... guess this Meat Loaf song title http://2.bp.blogspot.com/-qdic1BgfLNc/Ti0mvr938NI/AAAAAAAACTk/z7OVAP-JAyo/s200/jap.jpg
[01:14] <Darkside> dont know enough meatloaf
[01:14] <daveake> 2 out of 3 ain't bad
[01:14] <fsphil> I thought he only did one song
[01:17] <Darkside> and which song woudl that be?
[01:23] <daveake> nn all
[01:25] Laurenceb_ (~Laurence@host86-190-72-30.range86-190.btcentralplus.com) left irc: Ping timeout: 256 seconds
[01:28] <fsphil> bat out of hell. which makes no sense
[01:31] <amell> jededu: congrats on reaching norway. surprisingly warm at altitude for this time of year
[01:39] <amell> trying to find an arduino board with USB and 3.3v logic, not having much luck.
[01:42] chrisstubbs (~chrisstub@host86-140-103-33.range86-140.btcentralplus.com) left irc: Read error: Connection reset by peer
[01:42] <Darkside> amell: seeduino
[01:43] <Darkside> and seeduino mega
[01:43] <Darkside> also that should be seeeduino
[01:43] <Darkside> http://www.seeedstudio.com/depot/Seeeduino-V30-Atmega-328P-p-669.html
[01:43] <amell> thanks. looking
[01:43] <Darkside> it has a switch
[01:43] <Darkside> i use mine for 3.3v prototyping
[01:44] <amell> too expensive.
[01:44] <Darkside> err
[01:44] <Darkside> well
[01:44] <Darkside> good luck
[01:44] <amell> wanted something for £5 max.
[01:44] <Darkside> yeah
[01:44] <Darkside> good luck.
[01:45] <amell> wanted to link it up to ESP8266 wifi for dirt cheap wifi data logger.
[01:48] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) joined #highaltitude.
[01:53] <Darkside> level converters?
[01:53] <amell> one way to do it http://www.ba0sh1.com/tutorial-3-3v-hacking-for-arduino-nano/ ugh!
[01:53] <Darkside> what does the ESP chip talk?
[01:54] <Darkside> SPI?
[01:54] <SpeedEvil> amell: you do know you don't need to use a micro with the ESP chip?
[01:54] <SpeedEvil> You can program the user firmware with GCC, and it's flexible enough that you can for example do a 100KHz interrupt pushing a word out over SPI each time, while also doing wifi?
[01:55] <amell> really? Hmmm
[01:55] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) left irc: Ping timeout: 245 seconds
[01:55] <SpeedEvil> The 'AT command' stack is just a 'user' firmware. Tehre are many different ones, and some user-contributed
[01:55] <amell> got any links?
[01:55] <SpeedEvil> http://www.esp8266.com/viewtopic.php?f=6&t=376
[01:56] <SpeedEvil> $3 webserver, with LED to turn on and off.
[01:56] <amell> hum. someone apparently developed a webserver for the ESP
[01:57] <SpeedEvil> http://spritesmods.com/
[01:57] <SpeedEvil> yes
[01:58] pretec (~Matthias@port-92-195-117-199.dynamic.qsc.de) left irc: Ping timeout: 272 seconds
[02:04] <amell> yep. thanks for that, i can do what i need with this. just need to figure a way to connect usb power to it.
[02:04] <amell> i need to order a half pin SMD type breakout, the board i have doesnt have enough pins out.
[02:04] <SpeedEvil> https://github.com/nekromant/esp8266-frankenstein
[02:05] <SpeedEvil> 3.3V regulators are quite cheap indeed
[02:17] mightymik_ (4c67fd96@gateway/web/freenode/ip.76.103.253.150) left irc: Ping timeout: 246 seconds
[02:19] Hoogvlieger (~Hoogvlieg@ip41-37-211-87.adsl2.static.versatel.nl) left irc: Quit: Leaving
[02:27] <Lunar_Lander> good night!
[02:27] Lunar_Lander (~kevin@p54888915.dip0.t-ipconnect.de) left irc: Quit: Verlassend
[02:50] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) joined #highaltitude.
[02:55] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) left irc: Ping timeout: 256 seconds
[02:55] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) joined #highaltitude.
[03:06] Ojo (~pieter@c-24-30-12-2.hsd1.ga.comcast.net) joined #highaltitude.
[04:00] DL7AD_ (5b3d4d60@gateway/web/freenode/ip.91.61.77.96) left irc: Quit: Page closed
[04:07] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) left irc:
[04:18] es5nhc (~tarmo@108-40-71-217.static.internet.emt.ee) joined #highaltitude.
[04:40] day (~day@unaffiliated/day) joined #highaltitude.
[04:41] SpeedEvil (~quassel@tor/regular/SpeedEvil) left irc: Quit: No Ping reply in 180 seconds.
[04:42] SpeedEvil (~quassel@tor/regular/SpeedEvil) joined #highaltitude.
[04:43] day- (~day@unaffiliated/day) left irc: Ping timeout: 244 seconds
[04:52] day (~day@unaffiliated/day) left irc: Ping timeout: 264 seconds
[04:53] day (~day@unaffiliated/day) joined #highaltitude.
[05:13] <SA6BSS> hopefully ULC wakes up soon
[05:30] <SpacenearUS> New position from 03AETH32-1 after 039 hours silence - 12http://habhub.org/t/?focus=AETH32-1
[06:09] MoALTz__ (~no@user-188-33-7-126.play-internet.pl) joined #highaltitude.
[06:12] MoALTz_ (~no@user-188-33-7-126.play-internet.pl) left irc: Ping timeout: 255 seconds
[06:33] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) joined #highaltitude.
[06:45] Geoff-G8DHE-Lap (~Geoff-G8D@geoffg8dhe.plus.com) joined #highaltitude.
[06:46] Geoff-G8DHE_ (~Geoff-G8D@geoffg8dhe.plus.com) left irc: Read error: Connection reset by peer
[07:32] mikestir (~quassel@cpc10-brmb8-2-0-cust107.1-3.cable.virginm.net) joined #highaltitude.
[07:50] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) joined #highaltitude.
[08:13] gb73d (~gb73d@85.210.87.128) joined #highaltitude.
[08:53] <SA6BSS> can eadupic11 on Espoo Finland SDR
[08:53] <gb73d> Happy New Year
[08:54] <SA6BSS> HNY to u to!!
[08:54] <SA6BSS> $$$$$$EDUPIK1q4¸±,2:501|,192p.;1'u7,0042775,0=30l6,5.?,.4}B8B3
[08:59] <SA6BSS> DUPMC11,40",08:14,51.23"2,02054.959 &5544.1,$2 ,45D3
[08:59] <SA6BSS> could tht be alt, 5544
[09:02] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) left irc: Ping timeout: 265 seconds
[09:03] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) joined #highaltitude.
[09:03] Bob_Saget (~root@1-64-143-010.static.netvigator.com) left irc: Quit: Leaving
[09:03] <jededu> Could be
[09:20] guido_ (~guido@s5596f950.adsl.online.nl) joined #highaltitude.
[09:20] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[09:22] <SA6BSS> $$EDUPIC11,492,09:16:12"f`Rjh492,09:16:4,5922.42297,02123.83625,0>,5997.7,0.5(1.06*91
[09:23] <jededu> How are you recieving that SA6BSS
[09:23] <SA6BSS> Espoo Finland SDR global tuners
[09:24] <jededu> This one http://websdr.oh2lak.net:8901/ ?
[09:25] <SA6BSS> $$$EDUPIC11,495,09:22:14,5922.73315, 213". 0( 76#Bh495,09:22:14,5922.73315,02132.49,07,6231.2,-1.25,1.46*67?
[09:25] <SA6BSS> http://www.globaltuners.com/receiver/1499/js2
[09:26] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Ping timeout: 245 seconds
[09:30] <SA6BSS> greeennn!!
[09:30] <SA6BSS> hehe
[09:30] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Ping timeout: 256 seconds
[09:31] <x-f> yep
[09:33] <jededu> Wow :)
[09:33] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[09:34] <jededu> Its a shame it will go out of range it has about five days battery life
[09:35] <jededu> Cool x-f
[09:35] <x-f> -0.3 degrees :)
[09:40] jcoxon (~jcoxon@87.114.87.86) joined #highaltitude.
[09:40] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Ping timeout: 250 seconds
[09:41] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[09:42] <x-f> es5nhc, wake up
[09:43] <jcoxon> morning all
[09:44] <x-f> morning
[09:44] <jededu> Morning
[09:44] <jededu> x-f are there any trackers in that part of Russia ?
[09:45] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[09:45] <es5nhc> yes?
[09:46] <x-f> es5nhc, you're in range for EDUPIC11
[09:46] <es5nhc> Oho? Which parameters?
[09:46] <x-f> 434.075.5, 100 baud
[09:46] <es5nhc> !payload EDUPIC1
[09:46] <SpacenearUS> 03es5nhc: Can't find a flight doc matching your query
[09:46] <es5nhc> !payload EDUPIC11
[09:46] <SpacenearUS> 03es5nhc: Payload 03EDUPIC11 10(67ea) 03$$EDUPIC11 - 03RTTY Only - 03434.275 MHz USB 03RTTY 100/380Hz ASCII-8 none 2
[09:47] <es5nhc> OK, noted, x-f. Will set myself ready shortly
[09:47] <x-f> jededu, i've seen somebody on the map in St. Petersburg, but i don't remember his callsign
[09:47] <es5nhc> snus redirecting now to tracker.habhub.org?
[09:48] <jededu> Ok thx
[09:48] <es5nhc> x-f, ready for the bomb cyclone to arrive tomorrow?
[09:48] <x-f> what, what?
[09:48] <es5nhc> Strong storm to hit tomorrow
[09:48] <es5nhc> Gulf of Riga could get 35 m/s
[09:49] <es5nhc> SW Estonia expecting storm surge
[09:49] Action: x-f sighs.
[09:49] <es5nhc> bomb = central pressure drop of more than 24 hPa in 24 hours in an extratropical pressure
[09:49] <x-f> thanks for the warning
[09:55] Bob_Saget (~root@1-64-143-010.static.netvigator.com) joined #highaltitude.
[09:57] number10 (d57b01b9@gateway/web/freenode/ip.213.123.1.185) joined #highaltitude.
[10:00] scrapit85 (~scrapit85@151.249.68.242) joined #highaltitude.
[10:01] <jededu> !hysplit EDUPIC11
[10:01] <SpacenearUS> 03jededu: HYSPLIT for 03EDUPIC11 - 12http://spacenear.us/tracker/hysplit_cache/150101-04_178734_EDUPIC11.gif
[10:02] <jededu> Why is the hysplit from an earlier position ?
[10:02] guido_ (~guido@s5596f950.adsl.online.nl) left irc: Quit: This computer has gone to sleep
[10:02] Ojo (~pieter@c-24-30-12-2.hsd1.ga.comcast.net) left irc: Read error: Connection reset by peer
[10:03] Ojo (~pieter@c-24-30-12-2.hsd1.ga.comcast.net) joined #highaltitude.
[10:05] guido_ (~guido@s5596f950.adsl.online.nl) joined #highaltitude.
[10:09] <es5nhc> How often is the transmission?
[10:09] <x-f> http://ready.arl.noaa.gov/hypubout/183756_trj001.gif
[10:09] <jededu> Every 2 mins
[10:09] <es5nhc> Is something transmitted in between to help antenna aiming?
[10:10] <jededu> Not on this one
[10:10] <x-f> es5nhc, transmitting
[10:10] <es5nhc> Aha, OK
[10:10] <x-f> stopped
[10:11] <es5nhc> But I assume snus has been written off now?
[10:11] <es5nhc> spacenear.us I mean
[10:11] <es5nhc> it is redirecting to habhub
[10:11] <x-f> sadly yes
[10:11] jcoxon (~jcoxon@87.114.87.86) left irc: Quit: Leaving
[10:12] guido_ (~guido@s5596f950.adsl.online.nl) left irc: Quit: This computer has gone to sleep
[10:16] <x-f> it's loosing altitude :/
[10:17] <jededu> Could be in cloud it went down to 2500m yesterday over the north sea :)
[10:17] <x-f> hasn't been higher than 0.2 degrees below my horizon
[10:19] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) left irc: Ping timeout: 240 seconds
[10:20] guido_ (~guido@s5596f950.adsl.online.nl) joined #highaltitude.
[10:21] Mirici (~mirici@p4FEDDB86.dip0.t-ipconnect.de) joined #highaltitude.
[10:27] <SA6BSS> jededu: got it as low as 1837m
[10:29] Hoogvlieger (~Hoogvlieg@ip41-37-211-87.adsl2.static.versatel.nl) joined #highaltitude.
[10:32] MoALTz__ (~no@user-188-33-7-126.play-internet.pl) left irc: Quit: Leaving
[10:32] guido___ (~guido@s5596f950.adsl.online.nl) joined #highaltitude.
[10:32] MoALTz (~no@user-188-33-7-126.play-internet.pl) joined #highaltitude.
[10:33] <jededu> 1837 Nearly in the drink :)
[10:33] guido_ (~guido@s5596f950.adsl.online.nl) left irc: Read error: No route to host
[10:34] <Upu> es5nhc not written off, upgraded
[10:34] <Upu> but the old one is still there if you want it
[10:34] <Upu> spacenear.us/tracker/old.php
[10:34] <Upu> and super super old http://spacenear.us/tracker/legacy.php
[10:35] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) joined #highaltitude.
[10:36] <jededu> I really need to start making my own envelopes
[10:36] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Ping timeout: 244 seconds
[10:45] <x-f> i still see the signal, from partials i recon it is at 3.1 km altitude
[10:47] <x-f> oh, good, OH3UW got it
[10:48] <jededu> Its low :/
[10:49] <jededu> And warming
[10:57] SushiKenBrown (~quassel@cmr-208-124-174-194.cr.net.cable.rogers.com) joined #highaltitude.
[10:59] SushiKenBrown_ (~quassel@cmr-208-124-174-194.cr.net.cable.rogers.com) left irc: Ping timeout: 244 seconds
[10:59] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) joined #highaltitude.
[11:11] YO9GJX (~YO9GJX@109.100.114.128) joined #highaltitude.
[11:18] <jededu> Descent slowing
[11:22] <Reb-SM0ULC> darn, missed it
[11:24] <SA6BSS> this is a fun balloon to track, kind of exciting :)
[11:25] <jededu> It still may come out of it :)
[11:27] <SA6BSS> looks like it .
[11:30] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Ping timeout: 250 seconds
[11:30] <amell> estonia on an AAA? impressive
[11:31] jcoxon (~jcoxon@87.114.87.86) joined #highaltitude.
[11:31] <amell> On course for landing in Tallinn town square?
[11:32] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[11:35] <es5nhc> Poor EETN
[11:44] <SA6BSS> stabilizing, lest se if it climbes again
[11:45] <SA6BSS> nop
[11:47] number10 (d57b01b9@gateway/web/freenode/ip.213.123.1.185) left irc: Quit: Page closed
[11:48] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) left irc: Ping timeout: 245 seconds
[11:48] <SpacenearUS> New vehicle on the map: 03DC2EH-6 - 12http://habhub.org/t/?focus=DC2EH-6
[11:51] <jededu> good battery tho :)
[11:51] OH2FQV (58c15247@gateway/web/freenode/ip.88.193.82.71) joined #highaltitude.
[11:52] <SpeedEvil> http://www.ntsb.gov/investigations/AccidentReports/Reports/AIR1401.pdf bad battery
[11:52] <SpeedEvil> (final report into thte 787 battery falure of about a year ago
[11:57] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) left irc: Remote host closed the connection
[12:04] <SA6BSS> its going up....
[12:06] <SA6BSS> yes it is :)
[12:13] Hiena (~boreger@81.93.195.181.datatrans.hu) joined #highaltitude.
[12:18] gb73d (~gb73d@85.210.87.128) left irc:
[12:19] MoALTz_ (~no@user-46-112-49-198.play-internet.pl) joined #highaltitude.
[12:20] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) joined #highaltitude.
[12:23] MoALTz (~no@user-188-33-7-126.play-internet.pl) left irc: Ping timeout: 272 seconds
[12:26] <jededu> UP yay :)
[12:31] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[12:39] <jededu> That must have been rain
[12:39] scrapit85 (~scrapit85@151.249.68.242) left irc: Remote host closed the connection
[12:42] Steve_G0TDJ (d49f4aee@gateway/web/freenode/ip.212.159.74.238) left irc: Ping timeout: 246 seconds
[12:59] <Maxell> DC2EH-6 ?
[13:00] <lz1dev> likely a hotair balloon
[13:01] napos (~na@151-150-191-90.dyn.estpak.ee) left irc: Ping timeout: 265 seconds
[13:02] napos (~na@151-150-191-90.dyn.estpak.ee) joined #highaltitude.
[13:12] <jcoxon> on habhub is is possible to view a bigger altitude graph?
[13:12] scrapit85 (~scrapit85@151.249.68.242) joined #highaltitude.
[13:13] <SA6BSS> you can see it here http://x-f.lv/dev/habitat-graphs/payload/
[13:13] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Remote host closed the connection
[13:13] gonzo_ (~gonzo_@host-92-14-209-118.as43234.net) left irc: Read error: Connection reset by peer
[13:17] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[13:17] Lunar_Lander (~kevin@p5488986C.dip0.t-ipconnect.de) joined #highaltitude.
[13:18] kossy (a@unaffiliated/kossy) joined #highaltitude.
[13:19] <jededu> Back up to 2k :)
[13:20] <Lunar_Lander> hello :)
[13:24] <jcoxon> jededu, hooray
[13:25] <jededu> jcoxon It survived :)
[13:25] <jcoxon> pico's do keep you on the edge of your seat
[13:26] <jededu> It has another 3 days in it but i dont think it will be picked up again
[13:26] <jcoxon> sometimes the russians listen out
[13:29] li4m0 (~AndChat55@host31-52-193-47.range31-52.btcentralplus.com) joined #highaltitude.
[13:29] <jededu> x-f thinks there is somone near St Perersberg
[13:29] <jcoxon> recommend you email the list
[13:31] <li4m0> Happy new year and nice to see edupic11 still on the move
[13:31] gonzo_ (~gonzo_@host-92-14-209-118.as43234.net) joined #highaltitude.
[13:32] <jededu> Mailing list ?
[13:32] <jcoxon> jededu, you dipped below the Coxon Kilometre
[13:32] <jcoxon> jededu, yeah
[13:32] <jededu> Doing it now
[13:36] Pfysmate (5ad90c2f@gateway/web/freenode/ip.90.217.12.47) joined #highaltitude.
[13:39] luteijn (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Quit: leaving
[13:40] <Lunar_Lander> happy new year to all who weren't here last night
[13:40] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[13:41] Pfysmate (5ad90c2f@gateway/web/freenode/ip.90.217.12.47) left irc: Ping timeout: 246 seconds
[13:41] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Client Quit
[13:41] F0FYF (58b8c19a@gateway/web/freenode/ip.88.184.193.154) joined #highaltitude.
[13:41] Laurenceb_ (~Laurence@host86-190-72-30.range86-190.btcentralplus.com) joined #highaltitude.
[13:41] <jededu> Li4m0 did you track it yesterday
[13:44] <li4m0> No I had to go to work unfortunately
[13:44] <li4m0> I did attempt to quickly setup but ran out of time
[13:45] <SpacenearUS> New position from 03KF5PGW-8 after 0316 hours silence - 12http://habhub.org/t/?focus=KF5PGW-8
[13:45] <jededu> Ahh ok just wondered if the SDR worked
[13:47] <li4m0> Hab Preamp came yesterday morning so was dieing to get going. Missus had to kick me out the house in the end
[13:47] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[13:47] F0FYF (58b8c19a@gateway/web/freenode/ip.88.184.193.154) left irc: Quit: Page closed
[13:48] <jededu> I get that all the time :)
[13:53] <jededu> SA6BSS Cool !
[14:07] <M6XIMan> Happy New year everyone!
[14:09] <SA6BSS> jededu: :) have to leave soon, let the decoder running.
[14:09] scrapit85 (~scrapit85@151.249.68.242) left irc: Remote host closed the connection
[14:10] <jededu> Thx SA6BSS
[14:15] <Reb-SM0ULC> new stuff?
[14:16] scrapit85 (~scrapit85@151.249.68.242) joined #highaltitude.
[14:17] <jededu> New Stuff ?
[14:19] <Reb-SM0ULC> a bit tierd.. thought meaby therw was seomthing new to track...
[14:20] <Reb-SM0ULC> still a bit annoyed over passing up on the overflight..
[14:20] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Ping timeout: 256 seconds
[14:21] <SA6BSS> yeah, like me that had to work , bissiest day of the year when helios flew
[14:24] <Lunar_Lander> happy new year to Sweden :)
[14:26] <Reb-SM0ULC> Lunar_Lander: happy new year to you too!
[14:26] <SA6BSS> HNY!!
[14:26] <Lunar_Lander> thanks :)
[14:27] <Lunar_Lander> and thanks to Salomon August Andrée who brought ballooning to Sweden
[14:34] <jededu> HNY all !!
[14:34] <fsphil> here's hoping so
[14:35] <fsphil> it's rained since midnight. so far so good :)
[14:35] <jededu> lol
[14:43] tom1989 (5224f846@gateway/web/freenode/ip.82.36.248.70) joined #highaltitude.
[14:44] <tom1989> hi guys, im looking at the sim908 module which has gsm and gps functionality. i've looked online but can't find anything about the cocom limits on this device - does anyone know if it is suitable for hab?
[14:46] chrisstubbs (~chrisstub@host86-140-103-33.range86-140.btcentralplus.com) joined #highaltitude.
[14:46] <Haxxa> Is this the IRC for Rockets as well as weather balloons?
[14:46] <Upu> tom1989 depends which GPS module is in it
[14:47] <Upu> or you could just look in the datasheet :)
[14:47] <Upu> sim908
[14:47] <Upu> 18288km apparently
[14:47] <Upu> lets assume thats a typo and it should be meters
[14:47] <tom1989> the datasheet is here: http://www.synes.co.th/nicupload/20111109110456.pdf but i dont think it says
[14:47] <Upu> http://www.sos.sk/a_info/resource/c/SIM908-C.pdf
[14:48] <Upu> if you go high enough Haxxa sure :)
[14:48] <tom1989> ah found it
[14:48] <tom1989> thanks
[14:48] <tom1989> not suitable then :(
[14:48] <Upu> no few are tbh
[14:48] <Upu> !wiki gps modules
[14:48] <SpacenearUS> 03Upu: Wiki page 03gps_modules (guides) - 12http://ukhas.org.uk/guides:gps_modules
[14:49] <tom1989> although is that (altitude OR speed) or (speed AND altitude)?
[14:50] <Upu> is it a SiRF module ?
[14:50] <jcoxon> Haxxa, it can be - mainly balloons but rocket discussion is welcome
[14:50] diegoesep (~diegoesep@AMontpellier-656-1-280-237.w86-202.abo.wanadoo.fr) joined #highaltitude.
[14:50] <Haxxa> cool
[14:51] <tom1989> not sure upu - can't see the name on the datasheet anywhere
[14:52] <Upu> I've not seen a GSM + GPS chip set that is good over 18km
[14:53] <tom1989> would be a great find if it was
[14:53] <tom1989> ill try to find out
[14:59] <Haxxa> out of interest how do you make a balloon that travels around rather than bursts in the stratosphere
[15:01] <Upu> balance
[15:01] <Upu> you need to fill it with enough gas to get up there but not enough to make it burst
[15:01] <Haxxa> so its harder
[15:01] <Upu> you can do it with latex but they rarely manage a sunrise as the gas heats up, the balloon expands and bursts
[15:02] <Upu> the "foil" balloons float lower and eventually burst
[15:02] OH2FQV (58c15247@gateway/web/freenode/ip.88.193.82.71) left #highaltitude.
[15:03] tom1989 (5224f846@gateway/web/freenode/ip.82.36.248.70) left irc: Quit: Page closed
[15:03] <jededu> upu did you think about PITS
[15:03] <Upu> remind me
[15:04] <Upu> what was I thinking about ?
[15:04] <jededu> for the A boards
[15:04] <jededu> older version
[15:04] <Upu> oh yeah
[15:04] <Upu> its not worth getting another run done and I don't have any PCB's left
[15:04] <Upu> I have some PCB's which are faulty
[15:04] <Upu> easy to fix
[15:04] <jededu> hat about faulty ones
[15:05] <jededu> what
[15:05] <Upu> I can send you them if you want
[15:05] <Upu> welcome to assemble yourself
[15:05] <jededu> upupm
[15:10] Ojo_2 (~pieter@c-24-30-12-2.hsd1.ga.comcast.net) joined #highaltitude.
[15:10] <Ojo_2> x
[15:11] YO9GJX (~YO9GJX@109.100.114.128) left irc: Quit: Leaving
[15:13] Ojo (~pieter@c-24-30-12-2.hsd1.ga.comcast.net) left irc: Ping timeout: 244 seconds
[15:14] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[15:14] alan5 (~quassel@gateway/vpn/privateinternetaccess/alan5) joined #highaltitude.
[15:19] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Ping timeout: 265 seconds
[15:25] jcoxon (~jcoxon@87.114.87.86) left irc: Quit: Leaving
[15:29] scrapit85 (~scrapit85@151.249.68.242) left irc: Remote host closed the connection
[15:38] sp2ipt (~sp2ipt@89-69-164-149.dynamic.chello.pl) left irc: Ping timeout: 240 seconds
[15:43] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) joined #highaltitude.
[15:47] MoALTz_ (~no@user-46-112-49-198.play-internet.pl) left irc: Quit: Leaving
[15:47] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Quit: Changing server
[15:48] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[15:50] scrapit85 (~scrapit85@151.249.68.242) joined #highaltitude.
[15:50] gb73d (~gb73d@85.210.88.49) joined #highaltitude.
[15:53] sp2ipt (~sp2ipt@89-69-164-149.dynamic.chello.pl) joined #highaltitude.
[15:57] scrapit85 (~scrapit85@151.249.68.242) left irc:
[15:58] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Quit: leaving
[15:58] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[15:59] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) left irc: Client Quit
[16:00] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) left irc: Ping timeout: 250 seconds
[16:06] pc1pcl (~luteijn@5ED13723.cm-7-2a.dynamic.ziggo.nl) joined #highaltitude.
[16:06] pnephos (~pnephos@13.Red-81-39-33.dynamicIP.rima-tde.net) joined #highaltitude.
[16:08] number10 (d57b01b9@gateway/web/freenode/ip.213.123.1.185) joined #highaltitude.
[16:24] li4m0 (~AndChat55@host31-52-193-47.range31-52.btcentralplus.com) left irc: Ping timeout: 244 seconds
[16:25] li4m0 (~AndChat55@host31-52-193-47.range31-52.btcentralplus.com) joined #highaltitude.
[16:47] Mirici (~mirici@p4FEDDB86.dip0.t-ipconnect.de) left irc: Ping timeout: 245 seconds
[16:47] napos (~na@151-150-191-90.dyn.estpak.ee) left irc: Ping timeout: 250 seconds
[16:48] napos (~na@151-150-191-90.dyn.estpak.ee) joined #highaltitude.
[16:53] deano86 (deano86@gateway/shell/blinkenshell.org/x-eacnaihbonxkafvm) left irc: Ping timeout: 272 seconds
[17:01] deano86 (deano86@gateway/shell/blinkenshell.org/x-jvhueovglmmoxcsy) joined #highaltitude.
[17:17] deano86 (deano86@gateway/shell/blinkenshell.org/x-jvhueovglmmoxcsy) left irc: Ping timeout: 272 seconds
[17:24] deano86 (deano86@gateway/shell/blinkenshell.org/x-dcroywzfcvhicass) joined #highaltitude.
[17:29] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[17:31] <SpacenearUS> New position from 03PS-30 after 0310 hours silence - 12http://habhub.org/t/?focus=PS-30
[17:34] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) left irc: Ping timeout: 255 seconds
[17:36] li4m0 (~AndChat55@host31-52-193-47.range31-52.btcentralplus.com) left irc: Ping timeout: 245 seconds
[17:37] li4m0 (~AndChat55@host31-52-193-47.range31-52.btcentralplus.com) joined #highaltitude.
[17:41] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) joined #highaltitude.
[17:41] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) left irc: Remote host closed the connection
[17:41] <fsphil> wspr working well
[17:41] <fsphil> !ping PS-30
[17:41] <SpacenearUS> 03fsphil: Last contact with 03PS-30 was 0312 minutes ago
[17:41] <fsphil> !whereis PS-30
[17:42] <SpacenearUS> 03fsphil: 03PS-30 was over 03South Pacific Ocean 10(-47.34,-146.299) at 039929 meters about 0312 minutes ago
[17:42] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) joined #highaltitude.
[17:43] deano86 (deano86@gateway/shell/blinkenshell.org/x-dcroywzfcvhicass) left irc: Ping timeout: 272 seconds
[17:46] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Quit: Leaving
[17:49] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) joined #highaltitude.
[17:51] deano86 (deano86@gateway/shell/blinkenshell.org/x-duatmmswnurozlum) joined #highaltitude.
[17:53] Stork (~Nineplane@31.211.224.204) joined #highaltitude.
[17:55] <Stork> hello there! I'm using the RPI for my project which has one UART-port. I have the GPS connected to the RX-port of the RPI, and using GPSD to receive the data. The NMEA-data from the GPS is converted to JSON-format by GPSD which I use in my software. I have however noticed that GPSD blocks the UART port, which makes it impossible for me to transmit data to the radio (also using UART on
[17:55] <Stork> the RPI but the TX-line), becauise of different speeds (GPS uses 9600 baud, NTX2 I want to use 300 baud).
[17:55] <Stork> how have you solved it? (I don't want to parse NMEA myself as it seems really awful...)
[17:56] Mirici (~mirici@p4FEDDB86.dip0.t-ipconnect.de) joined #highaltitude.
[17:56] mightymik (4c67fd96@gateway/web/freenode/ip.76.103.253.150) joined #highaltitude.
[17:57] <mfa298> Stork: basicly by parsing the gps youself and switching the uart in your software between doing gps at a higher baud and rtty at a lower baud
[17:57] <mfa298> if parsing gps is beyond what you think you can manage any other method is likely to be harder still.
[17:58] <daveake> GPSD is probably a bad idea anyway as it's unlikely to put the GPS into flight mode! That might be possible; I have no idea
[17:59] <mfa298> parsing gps data really isn't that hard so would be worth doing anyway as a start.
[17:59] <Stork> parsing the NMEA myself? I read this and it didn't make me excactly feel like doing it myself: http://esr.ibiblio.org/?p=801
[17:59] <Stork> :)
[18:00] <Stork> actually it is possible to talk with the GPS thru GPSD, so it should be possible to set it in flight mode
[18:00] <Stork> but alright, if that is what two experts are suggesting I guess I'll parse it :)
[18:01] <daveake> That's just a rant
[18:01] <daveake> Parsing NMEA is not tricky
[18:02] <Stork> alright, I'll drop the GPSD-thread and try to do the parsing myself. thanks for the help!
[18:02] es5nhc (~tarmo@108-40-71-217.static.internet.emt.ee) left irc: Remote host closed the connection
[18:03] <daveake> Anyway on the Pi your only options are to share the serial port (so no GPSD), or add a USB-serial converter, or talk to the GPS with i2c or spi
[18:03] <mfa298> assuming your using a ublox you could also look at using the ubx protocol rather than parsing nmea
[18:04] <Stork> i'm using an ublox neo-6m. is it possible to force it to use i2c some way?
[18:05] <Upu> on by default
[18:05] <Upu> however
[18:06] <Upu> Pi doesn't support clock stretching
[18:06] <daveake> yes, however the Pi i2c hardware is broken so you have to do it in software
[18:06] <Upu> so you can't use hardware i2c
[18:07] <Stork> hmm... but on my gps there are only two ports... RX/TX (and of course GND and VCC)... I thought the RX/TX were always serial?
[18:07] <Stork> how does it know if its supposed to output in UART or I2c?
[18:07] <daveake> Not all breakout boards bring out the i2c lines
[18:08] <daveake> By default both i2c and async serial are enabled
[18:09] <Stork> ahh okey...
[18:09] <Stork> never been experimenting with i2c... think I have to check it out
[18:09] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) joined #highaltitude.
[18:10] simrun (~simrun@2a02:2658:1011:1::2:2178) joined #highaltitude.
[18:10] <Stork> thanks for all the tips!
[18:12] <jededu> Its interesting how often the same questions arise i remember having a similar conversation when I first got involved
[18:12] pnephos (~pnephos@13.Red-81-39-33.dynamicIP.rima-tde.net) left irc: Ping timeout: 240 seconds
[18:12] <mfa298> the easiest approach is likely to be sharing the uart (which I think is what most people have ended up doing)
[18:13] <daveake> such a shame that the a+/b+ didn't bring out the second serial to the header
[18:13] <mfa298> and there should be a few examples around of how people have done it (although it's highly recommended to write the code yourself so you know how it works)
[18:20] <Stork> daveake: probably for cost reasons. They even got the price down even more with the new A+
[18:21] <daveake> Kinda ... apparently it wasn't possible without adding an extra PCB layer
[18:22] <cm13g09> evening mfa298
[18:27] malgar (~malgar@adsl-ull-199-12.49-151.net24.it) left irc: Ping timeout: 245 seconds
[18:31] simrun (simrun@2a02:2658:1011:1::2:2178) left #highaltitude.
[18:45] ovasiliades (~ovasiliad@ppp005054254142.access.hol.gr) joined #highaltitude.
[18:52] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) left irc: Remote host closed the connection
[18:52] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) joined #highaltitude.
[18:58] <SpacenearUS> New vehicle on the map: 03huly_chase - 12http://habhub.org/t/?focus=huly_chase
[19:00] <Upu> its already 6 layers i think
[19:05] heathkid (~heathkid@unaffiliated/heathkid) left irc:
[19:17] <Stork> alright, finished with the NMEA-parser. Now this works nicely :) now i dont need GPSD anymore...
[19:18] <Stork> wasn't that hard to parse it. at least not with the GPS... if I connect some other I might get problems as NMEA doesnt seem to be 100% consistent
[19:19] <Lunar_Lander> a six layer PCB?
[19:19] <Lunar_Lander> why?
[19:25] heathkid (~heathkid@unaffiliated/heathkid) joined #highaltitude.
[19:26] HF_ATL (545b8051@gateway/web/freenode/ip.84.91.128.81) joined #highaltitude.
[19:27] <HF_ATL> happy new year all Hab's
[19:27] jcoxon (~jcoxon@87.114.87.86) joined #highaltitude.
[19:28] MoALTz (~no@user-46-112-49-198.play-internet.pl) joined #highaltitude.
[19:28] <Lunar_Lander> happy new year HF_ATL
[19:31] <HF_ATL> thank you
[19:31] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) left irc: Ping timeout: 250 seconds
[19:33] gb73d (~gb73d@85.210.88.49) left irc:
[19:35] BrainDamage (~BrainDama@dynamic-adsl-78-12-242-39.clienti.tiscali.it) joined #highaltitude.
[19:37] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) left irc: Ping timeout: 265 seconds
[19:39] BrainDamage (~BrainDama@dynamic-adsl-78-12-242-39.clienti.tiscali.it) left irc: Client Quit
[19:39] BrainDamage (~BrainDama@gateway/tor-sasl/braindamage) joined #highaltitude.
[19:40] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) joined #highaltitude.
[19:41] jcoxon (~jcoxon@87.114.87.86) left irc: Quit: Leaving
[20:02] dwhite152 (~dwhite152@c-67-162-187-71.hsd1.mo.comcast.net) left irc: Read error: No route to host
[20:02] LA5VNA (~n11618@80.202.132.88) left irc: Read error: Connection reset by peer
[20:02] dwhite152 (~dwhite152@c-67-162-187-71.hsd1.mo.comcast.net) joined #highaltitude.
[20:04] pretec (~Matthias@port-92-195-117-199.dynamic.qsc.de) joined #highaltitude.
[20:08] HF_ATL (545b8051@gateway/web/freenode/ip.84.91.128.81) left irc: Ping timeout: 246 seconds
[20:09] LA5VNA (~n11618@88.80-202-132.nextgentel.com) joined #highaltitude.
[20:14] LA5VNA (n11618@88.80-202-132.nextgentel.com) left #highaltitude.
[20:17] jcoxon (~jcoxon@87.114.87.86) joined #highaltitude.
[20:19] Doddy (56b8da5b@gateway/web/freenode/ip.86.184.218.91) joined #highaltitude.
[20:19] Doddy (56b8da5b@gateway/web/freenode/ip.86.184.218.91) left irc: Client Quit
[20:22] <jcoxon> ping SA6BSS
[20:22] <SA6BSS> yo
[20:22] <jcoxon> hey
[20:22] <jcoxon> how are you rx'ing edupic?
[20:23] <SA6BSS> I ws
[20:23] <SA6BSS> u meen the last packet?
[20:23] <jcoxon> yeah
[20:23] <jcoxon> says 30mins ago
[20:23] <jcoxon> just interested
[20:23] <SA6BSS> its just a backlog from the Finish SDR
[20:23] <jcoxon> oh right
[20:24] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) joined #highaltitude.
[20:25] <SA6BSS> i´m listening in on moscow sdr and another web sdr
[20:25] <SA6BSS> ru
[20:25] <SA6BSS> http://websdr.radiotx.ru/
[20:26] <jcoxon> any sucess?
[20:27] <SA6BSS> not so far
[20:31] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) left irc: Quit: Ex-Chat
[20:38] ovasiliades (~ovasiliad@ppp005054254142.access.hol.gr) left irc: Quit: Lost terminal
[20:40] LA5VNA (~n11618@80.202.132.88) joined #highaltitude.
[20:50] Stork (~Nineplane@31.211.224.204) left irc:
[20:52] bertrik (~quassel@rockbox/developer/bertrik) joined #highaltitude.
[20:53] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) left irc: Ping timeout: 240 seconds
[20:56] <jededu> Keep scanning SA6BSS thanks for tracking so far
[21:08] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) joined #highaltitude.
[21:16] HF_ATL (545b8051@gateway/web/freenode/ip.84.91.128.81) joined #highaltitude.
[21:17] paul_HAB-P (~paul_HABn@host165-120-31-102.range165-120.btcentralplus.com) left irc: Ping timeout: 244 seconds
[21:21] <SA6BSS> jededu: Tnx for sending them up :) First time I had a chanse to try my new yagi out on a hab, it worked verry well, hopefully the antenna wont blow down in the storm tomorrow
[21:22] <jededu> thx again for tracking it SA6BSS :)
[21:23] <jededu> Good luck with the storm :/
[21:24] LA5VNA1 (~n11618@88.80-202-132.nextgentel.com) joined #highaltitude.
[21:24] LA5VNA (~n11618@80.202.132.88) left irc: Read error: Connection reset by peer
[21:25] LA5VNA1 (~n11618@88.80-202-132.nextgentel.com) left irc: Read error: Connection reset by peer
[21:25] <fsphil> we've got some strong winds here atm
[21:26] <jcoxon> we lost a tree last week, considering we have only 2 trees in our little terrace garden it looks a bit sparse now
[21:26] Hes (h47wiiGX@tunkki.fi) left irc: Ping timeout: 244 seconds
[21:26] Hes (Vqh2SkK@tunkki.fi) joined #highaltitude.
[21:27] <fsphil> aww. was it an old one?
[21:28] <jcoxon> it wasn't a happy tree
[21:28] <jcoxon> it was trying to take down a fence
[21:28] <fsphil> ah
[21:28] <jcoxon> so i suspect it would have had to go eventually
[21:28] <jcoxon> oh well
[21:28] <Lunar_Lander> ohh
[21:28] <fsphil> I briefly had a maple out the back, but it only lasted a few years
[21:28] <jcoxon> we've got a bay tree in a pot now so i guess that'll do
[21:29] LA5VNA (~n11618@88.80-202-132.nextgentel.com) joined #highaltitude.
[21:30] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) joined #highaltitude.
[21:35] <jcoxon> fsphil, i got a 3d printer...
[21:37] <Lunar_Lander> nice
[21:37] <daveake> print a tree?
[21:37] <Lunar_Lander> :D
[21:37] <Lunar_Lander> I just had the same thought
[21:37] <jcoxon> i'll get cracking
[21:37] LA5VNA (n11618@88.80-202-132.nextgentel.com) left #highaltitude.
[21:37] <jcoxon> though my print bed is only 140mm x 140mm
[21:38] <daveake> bonsai then :)
[21:42] <fsphil> oh nice
[21:42] <fsphil> got it up and running yet?
[21:42] <jcoxon> yup
[21:42] mightymik (4c67fd96@gateway/web/freenode/ip.76.103.253.150) left irc: Ping timeout: 246 seconds
[21:42] <jcoxon> just about to start printing a moxon antenna for ukhasnet node
[21:42] <jcoxon> (take 2)
[21:43] <fsphil> haha, difficult to master?
[21:43] <jcoxon> yes
[21:44] <fsphil> could the active elements be embedded inside the 3d material?
[21:45] <fsphil> suppose it could be half printed, then the elements put in before the rest is printed
[21:45] EwanP (~yaaic@cm-84.210.25.93.getinternet.no) left irc: Ping timeout: 250 seconds
[21:45] <fsphil> would make a fairly rugged antenna
[21:46] <fsphil> maybe not weather proof though, don't think the 3d material likes UV
[21:46] <Upu> which printer did you get jcoxon ?
[21:46] <Upu> and what s/w are you using ?
[21:47] <jcoxon> fsphil, http://www.thingiverse.com/thing:573630/#instructions
[21:47] Muzer (~muzer@cpc72421-sotn15-2-0-cust723.15-1.cable.virginm.net) left irc: Excess Flood
[21:47] <jcoxon> Upu, i've got a reprappro huxley duo
[21:47] <jcoxon> and am using openscad, slic3r and pronterface
[21:47] <fsphil> cute
[21:47] <Upu> this is something I need to learn
[21:48] <jcoxon> Upu, i could print you the plastic parts...
[21:48] <fsphil> do they last?
[21:48] <fsphil> I think babs had problems with them degrading over time
[21:48] <jcoxon> https://reprappro.com/shop/reprap-kits/huxley-duo-hardware-kit/
[21:48] <jcoxon> fsphil, depends which one you use
[21:48] <jcoxon> i'm using PLA which is biodegradable
[21:48] <Lunar_Lander> nice!
[21:49] <jcoxon> ABS isn't but its not as kind to the environment etc
[21:49] <Upu> I only need one for prototyping enclosures
[21:50] <jcoxon> take 3
[21:50] <fsphil> only 26cm tall, I thought from the picture it was a huge thing
[21:50] <jcoxon> no this on is the mini one
[21:50] <jcoxon> their big one is hte ormerod
[21:50] <jcoxon> https://reprappro.com/shop/reprap-kits/ormerod-2-kit/
[21:53] Muzer (~muzer@cpc72421-sotn15-2-0-cust723.15-1.cable.virginm.net) joined #highaltitude.
[21:53] heathkid (~heathkid@unaffiliated/heathkid) left irc: Read error: Connection reset by peer
[21:54] heathkid (~heathkid@unaffiliated/heathkid) joined #highaltitude.
[21:54] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) left irc: Read error: Connection reset by peer
[21:55] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) joined #highaltitude.
[21:58] Mirici2 (~mirici@p4FEDDB86.dip0.t-ipconnect.de) joined #highaltitude.
[21:58] Babs (5eaf0925@gateway/web/freenode/ip.94.175.9.37) joined #highaltitude.
[22:00] deano86 (deano86@gateway/shell/blinkenshell.org/x-duatmmswnurozlum) left irc: Ping timeout: 272 seconds
[22:01] <Laurenceb_> ooh we have proper horizon projections on the map
[22:01] <Laurenceb_> very nice work
[22:06] Bob__Saget (~root@1-64-143-010.static.netvigator.com) joined #highaltitude.
[22:06] Mirici (~mirici@p4FEDDB86.dip0.t-ipconnect.de) left irc: Ping timeout: 264 seconds
[22:06] Bob_Saget (~root@1-64-143-010.static.netvigator.com) left irc: Ping timeout: 264 seconds
[22:06] jededu (edusuppor@host86-191-233-190.range86-191.btcentralplus.com) left #highaltitude ("Leaving").
[22:14] deano86 (deano86@gateway/shell/blinkenshell.org/x-wjicsjtzdoibrsug) joined #highaltitude.
[22:17] xbbsaffsad (5cfbff0c@gateway/web/freenode/ip.92.251.255.12) joined #highaltitude.
[22:18] xbbsaffsad (5cfbff0c@gateway/web/freenode/ip.92.251.255.12) left irc: Client Quit
[22:29] Hiena (~boreger@81.93.195.181.datatrans.hu) left irc: Quit: Konversation terminated!
[22:30] diegoesep (~diegoesep@AMontpellier-656-1-280-237.w86-202.abo.wanadoo.fr) left irc: Ping timeout: 240 seconds
[22:31] napos (~na@151-150-191-90.dyn.estpak.ee) left irc: Ping timeout: 250 seconds
[22:32] chris_99 (~chris_99@unaffiliated/chris-99/x-3062929) left irc: Quit: Ex-Chat
[22:32] napos (~na@151-150-191-90.dyn.estpak.ee) joined #highaltitude.
[22:35] Kodar (~Kodar@ham4.cc.fer.hr) joined #highaltitude.
[22:43] <M6XIMan> jcoxon/fsphil/Upu: I have a Reprappro MendelMax Mono. Bit of a bugger to calibrate, but produces exceptionally nice prints.
[22:44] <M6XIMan> Only thing I don't like is the fact it's a moving bed, as that stretches and wears the Y axis belt quicker and can lead to backlash
[22:44] <M6XIMan> Some nice aerial footage here. Beats the BBC's footage somewhat :) https://www.youtube.com/watch?v=OX99sIC-MoQ
[22:48] <jcoxon> M6XIMan, i've managed to add some nice callibration gcodes to slic3r
[22:48] <jcoxon> which it runs before printing
[22:48] <jcoxon> means it takes a while to get going but seems to have a better print
[23:00] <M6XIMan> What do the gcodes do?
[23:01] ljenkins_ (~ljenkins@2001:1948:212::a) joined #highaltitude.
[23:01] <M6XIMan> Once it's calibrated you shouldn't need to do anything else other than recalibrate periodically
[23:01] <M6XIMan> And do regular maintenance and look out for loose screws, loose belts, etc.
[23:02] <M6XIMan> I do find that if I lift or move it at all then recalibration is mandatory
[23:02] ljenkins (~ljenkins@137.190.80.249) left irc: Ping timeout: 256 seconds
[23:03] jcoxon (~jcoxon@87.114.87.86) left irc: Quit: Leaving
[23:04] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) left irc: Remote host closed the connection
[23:05] <M6XIMan> jcoxon: I found the calibration the 3-axis YACO and One Euro Coin holder smodels on Thingiverse to be very useful for getting perfectly sized/made prints
[23:06] <M6XIMan> The coin holder model is perfect for checking for backlash as the result is more oval than round, and the infill in the corners doesn't quite meet the edges
[23:11] mikestir (~quassel@cpc10-brmb8-2-0-cust107.1-3.cable.virginm.net) left irc: Remote host closed the connection
[23:12] <Geoff-G8DHE> Impressive stablity! https://www.youtube.com/watch?v=xeEyOQJsdi0&feature=youtu.be
[23:20] andyvk5 (~andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) joined #highaltitude.
[23:22] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) joined #highaltitude.
[23:24] DL7AD (~quassel@p579238D7.dip0.t-ipconnect.de) left irc: Read error: Connection reset by peer
[23:27] Babs (5eaf0925@gateway/web/freenode/ip.94.175.9.37) left irc: Ping timeout: 246 seconds
[23:27] number10 (d57b01b9@gateway/web/freenode/ip.213.123.1.185) left irc: Quit: Page closed
[23:28] pretec (~Matthias@port-92-195-117-199.dynamic.qsc.de) left irc: Remote host closed the connection
[23:39] Kodar (~Kodar@ham4.cc.fer.hr) left irc:
[23:43] Lunar_Lander (~kevin@p5488986C.dip0.t-ipconnect.de) left irc: Quit: Verlassend
[23:44] <amell> jcoxon: the stepped cube is a good one for calibration
[23:44] <fsphil> he's not here
[23:46] <amell> i missed the 3d printing discussion :( got a mendel 90 a few weeks ago
[23:47] <fsphil> nice. I keep hitting situations where one would be handy. can't justify it yet though
[23:49] <amell> i couldnt justify it either& lol
[23:53] chrisstubbs (~chrisstub@host86-140-103-33.range86-140.btcentralplus.com) left irc: Quit: HydraIRC -> http://www.hydrairc.com <- Organize your IRC
[23:54] Muzer (~muzer@cpc72421-sotn15-2-0-cust723.15-1.cable.virginm.net) left irc: Excess Flood
[23:54] andyvk5 (andyvk5@ppp14-2-45-88.lns21.adl2.internode.on.net) left #highaltitude.
[23:55] Muzer (~muzer@cpc72421-sotn15-2-0-cust723.15-1.cable.virginm.net) joined #highaltitude.
[23:59] MoALTz_ (~no@user-46-112-49-198.play-internet.pl) joined #highaltitude.
[00:00] --- Fri Jan 2 2015