[00:00] snaked (~snaked@user/snaked) got netsplit. [00:00] aOf (~DarkoAOF@95-178-157-211.dsl.optinet.hr) got netsplit. [00:00] SA6BSS-Mike (~SA6BSS-Mi@h-79-136-43-42.A357.priv.bahnhof.se) got netsplit. [00:00] Haxxa (~Haxxa@122.199.45.213) got netsplit. [00:00] happysat (~katpoep@82-169-224-141.biz.kpn.net) got netsplit. [00:00] happysat (~katpoep@82-169-224-141.biz.kpn.net) returned to #highaltitude. [00:00] aOf (~DarkoAOF@95-178-157-211.dsl.optinet.hr) returned to #highaltitude. [00:01] SA6BSS-Mike (~SA6BSS-Mi@h-79-136-43-42.A357.priv.bahnhof.se) returned to #highaltitude. [00:03] snaked (~snaked@user/snaked) returned to #highaltitude. [00:05] Haxxa (~Haxxa@122.199.45.213) returned to #highaltitude. [00:05] New position from 03N4XWC-1 after 039 hours silence - 12https://tracker.habhub.org/#!qm=All&q=N4XWC-1 [00:17] fredy090 (~fredy@ppp-94-67-45-12.home.otenet.gr) left irc: Ping timeout: 256 seconds [00:24] Laurenceb_ (~Laurence@135.141.208.46.dyn.plus.net) left irc: Ping timeout: 240 seconds [00:37] Laurenceb_ (~Laurence@135.141.208.46.dyn.plus.net) joined #highaltitude. [01:06] aOf_ (~DarkoAOF@95-178-157-171.dsl.optinet.hr) joined #highaltitude. [01:09] aOf (~DarkoAOF@95-178-157-211.dsl.optinet.hr) left irc: Ping timeout: 252 seconds [02:05] Laurenceb_ (~Laurence@135.141.208.46.dyn.plus.net) left irc: Ping timeout: 256 seconds [02:12] aOf (~DarkoAOF@95-178-159-78.dsl.optinet.hr) joined #highaltitude. [02:14] aOf_ (~DarkoAOF@95-178-157-171.dsl.optinet.hr) left irc: Ping timeout: 252 seconds [02:55] snaked (~snaked@user/snaked) left irc: Ping timeout: 245 seconds [02:57] snaked (~snaked@user/snaked) joined #highaltitude. [03:20] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) joined #highaltitude. [04:14] YO9GJX (~YO9GJX@109.100.112.132) left irc: Remote host closed the connection [06:30] New position from 03BZ-LORA-5 after 0313 hours silence - 12https://tracker.habhub.org/#!qm=All&q=BZ-LORA-5 [06:58] OZ1SKY_Brian (~OZ1SKY@77.33.10.215.dhcp.fibianet.dk) joined #highaltitude. [06:59] gm bz-rtty-5 freq? [07:02] New position from 03BZ-RTTY-5 after 0314 hours silence - 12https://tracker.habhub.org/#!qm=All&q=BZ-RTTY-5 [07:04] !dial BZ-RTTY-5 [07:04] 03SA6BSS-Mike: Latest dials for 03BZ-RTTY-5 10(7706): 0317.4838 MHz, 396.435999 MHz, 434.66214 MHz [07:05] tjena, forgot the command, tack :-) [07:06] :) [07:06] dont know if the 434.662 migh be it [07:06] pretty sure its not 17 or 396mhz :-) [07:07] lol [07:07] me to [07:07] still some tropo going on [07:08] but not hearing anything on 434.662 [07:09] lets ping PE2BZ [07:10] you are quite a bit out of rnage even though you usually gets them far out [07:10] but tropo been very strong over the north sea, so not impossible [07:10] I have a aprs board out for solar testing and I do se a couple of 2m beacon [07:11] even worked ireland on 70cm [07:11] cool! [07:11] just have a issue with the RAF Fylingdales UHF radar making some QRM [07:15] what freq are they working on? [07:16] Ping G8KNN , you have the rtty freq on Bens board? [07:16] 420-450 [07:17] rr [07:18] https://en.wikipedia.org/wiki/PAVE_PAWS [07:19] 1792 elements :-) [07:20] wow!! https://upload.wikimedia.org/wikipedia/commons/thumb/c/c1/Cape_Cod_Air_Station_-_HAER_MA-151-A_-_384568pu.jpg/1280px-Cape_Cod_Air_Station_-_HAER_MA-151-A_-_384568pu.jpg [07:20] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) left irc: Remote host closed the connection [07:20] yes [07:20] im sure it can pick up BZ-RTTY too :-) [07:22] it can probably ionize the sky by itself, dont need any troppo, lol [07:23] got a old video of it see from here https://twitter.com/hougedk/status/1307222459310059520 [07:23] video starts 9sec in [07:31] ok [07:32] well, a 10uf cap on the aprs board seems to have fixed restart issue, now its getting close to test this new setup :) [07:32] now Im of to work for 4 h [07:33] Have a good one Mike, 4H is bearable :-) [07:34] tnx, yeah, it quite ok [07:36] here is the git with fw and pcb ifyou or anyone is interested https://github.com/micked99/SX1278 [07:36] wow thats small and good looking [07:42] that chip will do 4FSK just fine too ;-) [07:45] and we do love our 4FSK :-) [07:46] im working on an updated release of horus-gui and associated stuff at the moment [07:46] which adds support for the v2 mode, which is a bit more customizable [07:46] cool, looking forward to it. [07:50] we got 2 new trackers here now, but dont know them, just that they are on the map [07:50] sondes that is [07:50] LazyLeopard (~irc-clien@chocky.lazyleopard.org.uk) joined #highaltitude. [07:51] and got a email from oz1arq station, he´s been trying also to get 4 sdrs running, with no luck. he tried on a PI4 and also a pc [07:51] uhh [07:51] yeah 4 RTLSDRs on one machine is asking for trouble [07:51] as soon as sdr4 kicks in, it crashes [07:52] also with a powered usb hub [07:52] i think this is just a RTLSDR thing [07:53] there is some stuff in the works to use a multi-channel SDR backend btw, i had a long zoom call with Phil Karn the other day [07:53] who is developing such a thing. [07:53] well, *has* developed it, but it needs some changes to be useful to auto_rx [07:53] GM all, 434.662 is the right QRG for the RTTY tracker indeed [07:54] sounds great Mike [07:54] GM Ben TU [08:00] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) joined #highaltitude. [08:06] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) joined #highaltitude. [08:07] fredy090 (~fredy@ppp-94-67-45-12.home.otenet.gr) joined #highaltitude. [08:20] New position from 03W8VPV-1 after 0314 hours silence - 12https://tracker.habhub.org/#!qm=All&q=W8VPV-1 [08:22] New position from 03eui-70b3d57ed0044685 after 0317 hours silence - 12https://tracker.habhub.org/#!qm=All&q=eui-70b3d57ed0044685 [08:35] DM5TT (~DM5TT@mue-88-130-67-213.dsl.tropolys.de) joined #highaltitude. [08:35] Hi All! [08:40] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) left irc: Remote host closed the connection [08:44] DM5TT (~DM5TT@mue-88-130-67-213.dsl.tropolys.de) left irc: Quit: Connection closed [08:45] snh (~snh@wireguard/tunneler/snh) left irc: Quit: ZNC - http://znc.in [08:46] snh (~snh@wireguard/tunneler/snh) joined #highaltitude. [08:52] pd7r (~pd7r@ip-213-127-156-114.ip.prioritytelecom.net) joined #highaltitude. [09:00] snh (~snh@wireguard/tunneler/snh) left irc: Quit: ZNC - http://znc.in [09:01] New position from 03SQ6NEI-4FSK after 036 days silence - 12https://tracker.habhub.org/#!qm=All&q=SQ6NEI-4FSK [09:08] snh (~snh@wireguard/tunneler/snh) joined #highaltitude. [09:16] New position from 03NOB8 after 0315 hours silence - 12https://tracker.habhub.org/#!qm=All&q=NOB8 [09:25] pd7r (~pd7r@ip-213-127-156-114.ip.prioritytelecom.net) left irc: Quit: Connection closed [10:01] New position from 03SQ6NEI-12 after 0316 days silence - 12https://tracker.habhub.org/#!qm=All&q=SQ6NEI-12 [10:22] New vehicle on the map: 03SP6KZ-13 - 12https://tracker.habhub.org/#!qm=All&q=SP6KZ-13 [10:32] GM all BZ-LORA-5 is as 432.662 Mode 2 BZ-RTTY-5 is at 434.662 200 baud 7n2 600 shift [10:33] snaked (~snaked@user/snaked) left irc: Remote host closed the connection [10:33] PE2BZ: new version of horus-gui incoming... [10:34] snaked (~snaked@user/snaked) joined #highaltitude. [10:34] VK5QI, you did what ? ;-) [10:34] https://rfhead.net/horus/horusgui/ [10:34] v0.2.1 [10:35] yes there is 200 baud in the list for RTTY now [10:35] Now downloading :-) [10:37] there is also support for decoding Horus Binary v2 payloads, though you are unlikely to see any of that in the wild for a while [10:38] the v2 packet format is more to allow for custom data fields, which i expect more to be used in other payloads [10:38] i have a lot of documentation to write before that happens [10:42] ok1mdx (~ok1mdx@ip-37-188-172-139.eurotel.cz) joined #highaltitude. [10:46] PE2BZ: it will drop your config unfortunately, i had to change the name of some of the modes [10:46] and that would result in the config breaking [10:50] New position from 03OK1OMG after 038 hours silence - 12https://tracker.habhub.org/#!qm=All&q=OK1OMG [10:58] New vehicle on the map: 03SP6KZ-4FSK - 12https://tracker.habhub.org/#!qm=All&q=SP6KZ-4FSK [11:03] New vehicle on the map: 03leo-2 - 12https://tracker.habhub.org/#!qm=All&q=leo-2 [11:07] VK5QI, that´s not a big problem. I live at 52 N and 4.2 E :-) [11:08] Save me a lot of typing. [11:08] haha [11:10] Mark, I am not 100 pecent convinced of the rtty decoding at 200 baud. The signal is not very strong, but so far no decodes on the horus gui. I will try again in half an hour and make a recording from the Icom reception [11:11] The SNR goes from -10 (noise) to around -1 when the transmission starts [11:12] but ¨decode failed. could not parse rtty sencence -crc failed¨ where dlfldigi gives a green decode. [11:14] that could just be from the transmitted string [11:14] got an example of a complete string? [11:16] $$$$$BZ-RTTY-5,182,11:13:22,53.68833,.87336,7550,"0,60,7*1,3.72,3.63*F678 [11:16] From dlfldigi decoded [11:16] uh [11:17] thats a corrupt sentence i guess [11:17] because i see a * in the middle of the sentence [11:17] let me retry that ;-) [11:17] $$BZ-RTTY-5,184,11:16:08,53.67360,1.88066,7527,19,70,9.6,3.62,3.54*72FE [11:17] looks OK :/ [11:18] how do I use 200bd @horus gui, I only see 100 and 300 bd? [11:18] https://rfhead.net/horus/horusgui/ [11:19] Just update :-) [11:19] Am I using 0.8 :)) [11:20] The version with 200 baud support has at least been online for over an hour ;-) [11:20] PE2BZ: well the sentence structure looks ok [11:20] a recording (with a reasonable signal) would probably help [11:20] have you successfuly received a signal from this payload at a different baud rate? [11:21] as changing the baud rate doesnt really affect any of the downstream RTTY frame extraction stuff [11:21] Not with horus gui, no, [11:21] But I´ll await PC4l [11:22] s t a r t i n g [11:22] PE2BZ: so it might be some other issue with the telemetry... [11:22] PC4l´s results [11:23] Strange thing, last 3 strings give 0 dB SNR, mask estimation works, I see mark and space in the spectra window, but [11:24] latest packet raw gives just a lot of garbage. [11:24] which I can copy with right mouse button, but cannot paste ? [11:25] $$BZ-RTTY-5,190,11:24:24,53.62933,1.91191,7536,18,70,p\pXf\lnXf\jrTh [11:25] almost :) [11:25] But the tracker is returning home so the signal should improve [11:25] PC4L, can you copy and paste that from the horus gui ? [11:26] its possible that its not happy with the modulation [11:26] like, if there's any gaps between transmitted bytes it will not lock on well [11:27] unlike dl-fldigi, horusdemodlib does not treat rtty transmissions on a byte-by-byte basis - it looks for a header ('$$$$$') and then looks for the '*XXXX' CRC [11:27] can you link the code that is producing this? [11:27] there´s the first decode using horus [11:28] https://ibb.co/b112zTd [11:29] https://www.dropbox.com/s/uopwu5xthi9y4aa/horusgui%20200%20baud.webm?dl=0 [11:29] webm? [11:30] a wav file would be nice [11:30] This was a movie file from the screen recorder. [11:30] though im mor einterested in the code thats doing this transmission [11:30] rr https://github.com/RoelKroes/TBTracker [11:31] But at PC4L it decodes great :-) [11:31] So I am checking my settings. [11:32] New position from 03OK1OMG-12 after 039 hours silence - 12https://tracker.habhub.org/#!qm=All&q=OK1OMG-12 [11:32] ok its radiolib, so its probably delay-based RTTY transmission [11:35] yeah i thin kpart of the issue here may be to do with short gaps between byts [11:35] bytes* [11:36] the horus FSK demod expects a continuous bitstream, not one where some bits are a bit longer than others :-) [11:36] New position from 03N4XWC-1 after 0310 hours silence - 12https://tracker.habhub.org/#!qm=All&q=N4XWC-1 [11:36] drsnik (~drsnik@gate3.ima.cz) left irc: Read error: Connection reset by peer [11:47] drsnik (~drsnik@gate3.ima.cz) joined #highaltitude. [12:06] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) joined #highaltitude. [12:06] hi there! [12:07] SQ3XBD (~SQ3XBD@85.128.1.13) joined #highaltitude. [12:08] PE2BZ, have you received your Lora E5? [12:10] I have received, soldered and programmed my design based on Lora E5: http://www.up-in-the-air.com.s3-website-eu-west-1.amazonaws.com/Up4.pdf [12:11] After some struggle with STM32 programming, I am close to having a functional payload [12:12] ok1mdx (ok1mdx@ip-37-188-172-139.eurotel.cz) left #highaltitude. [12:13] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) joined #highaltitude. [12:13] Only part left is that I can't manage to put the MAX7Q in backup mode. I've tried UPX command RXM_PMREQ_OFF[16] = {0xB5, 0x62, 0x02, 0x41, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x4D, 0x3B} without success. [12:14] Also tried the undocumented {0xB5, 0x62, 0x06, 0x57, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x50, 0x4B, 0x43, 0x42, 0x86, 0x46} which I found here: http://tt7hab.blogspot.com/2017/06/the-low-power-setup.html but without success either [12:14] Has anyone experienced resistance of these modules to backup mode ? [12:21] setBackup[] = {0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x08, 0x00, 0x16, 0x74}; [12:22] thats what I use on my MAX7 modules C/Q working fine [12:24] New position from 03SQ3XBD-4FSK after 0314 days silence - 12https://tracker.habhub.org/#!qm=All&q=SQ3XBD-4FSK [12:27] SA6BSS-Mike, thks ! I'll try now! For those interested, here are some pictures: https://s3.eu-west-1.amazonaws.com/www.up-in-the-air.com/Up4-2sides.jpg and https://s3.eu-west-1.amazonaws.com/www.up-in-the-air.com/Up4-weight.jpg [12:35] SA6BSS-Mike, does not work either... I still get ~40mA average consumption. Do you send another command before? I've tried as first command and also after disabling NMEA without luck. [12:41] you have to stop the serial or it will be powered through the rx/tx pinms [12:42] ok, let me investigate that on mbed... [12:43] Your command seems to disable GNSS only. What current did you get after that? [12:45] hang on , I need to eat first back in 10 [12:46] New position from 03SQ3XBD-12 after 0314 days silence - 12https://tracker.habhub.org/#!qm=All&q=SQ3XBD-12 [12:48] Running your command after initializing the GPS reduces the consumption down to 6.63mA. This seems in line with https://ukhas.org.uk/guides:ublox_psm#:~:text=Switch%20the%20RF%20GPS%20section%20off%2C%20draws%20about%205mA%2C%20retains%20its%20settings%2C%20wakes%20on%20serial%20command. [12:49] But it seems to only stop the GNSS and not put the GPS in full backup mode (should be less than 1mA). [12:50] I'll try to investigate if the problem comes from the serial [12:56] SA6BSS-Mike1 (~SA6BSS-Mi@h-79-136-43-42.A357.priv.bahnhof.se) joined #highaltitude. [12:58] dont have the MAX7 notes but in the MAX8 it reads "No TX + AVR + GNSS-off 4.1mA" [12:59] SA6BSS-Mike (~SA6BSS-Mi@h-79-136-43-42.A357.priv.bahnhof.se) left irc: Ping timeout: 240 seconds [12:59] Nick change: SA6BSS-Mike1 -> SA6BSS-Mike [13:08] I would say the Serial draw might only acure if you turn the gps off by cutting its VCC and not by doing it by sw [13:08] so the serial likley not the cause for the 6.1mA [13:08] ok [13:09] 6.1mA does not seems odd since it only stops the GNSS [13:09] but I don't understand how to switch it off completely through software [13:10] but the max 6 says about 5mA , it never gets below that [13:10] so if you get 6.1 on max7 its about the same [13:11] you mean I can not activate the backup mode through software (15uA for MAX7Q and 300uA for MAX7C) ? [13:11] as you runinng it on solar 3-4mA wont change anything regarding up time and solar wake up [13:12] I have tried bu not found the setting, I simply had the option of turning the GPS completely off by cutting VCC so I never dough any deeper into the mather [13:13] you're right, but I do need to add a supercap because I can not (yet) control TX power with Lora E5 and it draws 45mA. [13:13] so I am tight on max current draw [13:13] and since I do have to use a supercap, I wanted to try to continue emit at night everything else than position [13:14] this will be possible only if I can completely switch off the GPS [13:14] ok, but 45mA with 6psc 39x19 should be good to below 20° solar with cells only [13:14] aha, ok [13:15] well, the peak will be closer to 55mA with GPS (GNSS switch off) [13:16] And i'd like something: I think with lora I can get a rougth position just with TDOA, even at night [13:16] yes, only aprs tx "keep alive" with no aprs is fine [13:16] *with no gps [13:16] yes, but for that I need to switch off this gps... [13:17] tried ublox center? [13:17] nope [13:17] new lead, thks [13:17] that would be you next step [13:18] yes, that's strange though that nobody reports on this problem and I'm seen a lot of people reporting completely switching off the GPS by software. [13:18] I turn GPS on/off via a extintBackup pin [13:20] SW works too [13:20] can you share your UBX command? [13:20] for SW? [13:20] yes, please [13:20] maybe it does not work for MAX7Q [13:21] EXTINT would be an option but it would require some fine tip soldering ;-) [13:21] LeoBodnar: does pin5 pull low turn off the MAX modules? [13:22] let me try. i think EXTINT backup is not configured by default, is it? [13:23] ok, so its apin you can set to a nr of thing, thats what I remeber from reading up a few month ago [13:24] idk, I use bare M8030 and you can set whatever GPIO you want for extintBackup [13:25] I have used b5 62 02 41 8 0 0 0 0 0 2 0 0 0 on MAX-7 [13:29] LeoBodnar, it looks like the same command as given by SA6BSS-Mike. It does switch off GNSS but no the entire module and I still have a curent of 6.6mA. [13:30] 6.6mA is too high for backup and too low for continuous [13:30] is it periodic PSM? [13:31] no Continuous Mode [13:31] 6mA in continuous? wow [13:31] with GNSS off it makes sense [13:31] then it's not continuous mode :D [13:32] but from my understanding GNNS off != backup mode [13:32] GNSS as a task or as a HW? [13:33] there is a GNSS task in Ublox module [13:34] GNSS task can be running or stopped. When it is stopped the rest is all ticking along - comms, etc [13:34] in backup the whole core is off and to do anything you need to wake it up first [13:34] I turn on the module, disable NMEA, configure NAV_MODE, configure continous mode, then stop GNSS with your UBX command and I get 6.6mA [13:35] vincentsan, I received 2 developer board adn one chip indeed, I have been able to TX with the AT commando´s, but I am (more as a bit !) clueless how to proceed writing a program for it. So if you have any testing firmware available ? I think I managed to get the programming software running :-) [13:35] oh that makes sense [13:35] yes, I think I am in your first case: "GNSS is stopped and the rest is all ticking along - comms, etc" [13:36] putting module into backups state does not stop GNSS task afaik [13:36] but whenever I try other backup command: {0xB5, 0x62, 0x06, 0x57, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x50, 0x4B, 0x43, 0x42, 0x86, 0x46}, nothing happens [13:37] so you are saying I should first stop GNSS task, and then put module in back up ? [13:37] no, you would not want to stop GNSS task unless you have a good reason to [13:37] survive night with a supercap [13:37] it's taken care of by the RTOS [13:38] just going to BACKUP state is all you need [13:38] yes, but the module does not respond to that and continues to draw ~40mA [13:38] there is no point trying it on HW until you have it working through Ucenter [13:38] ok [13:39] sounds sane [13:39] it should be really a fallback for any problem with commands [13:39] does it work on mac os ? ;-) [13:40] under VMWare it does [13:40] does not seem to... [13:40] ok, will need more time then ! [13:40] New vehicle on the map: 03W3UAV-15 - 12https://tracker.habhub.org/#!qm=All&q=W3UAV-15 [13:41] are you using UART or I2C? [13:41] I use I2C on the tracker and UART for Ucenter [13:41] UART [13:42] ah ok [13:42] but I can try with a spare chip [13:42] do you know if MAX7C and MAX7Q behave the same, software wise? [13:43] yeah get it ALL working in Ucenter and then transfer to the HW [13:43] Ok, will make it work with MAX7C and then transfer on HW with MAX7Q [13:44] PE2BZ, it has been a long road but I managed to program the Lora E5 mini and my custom board. Starting with the seeedstudio pointers and finally moving the mbed which is great! [13:44] I think 7C has slightly higher backup current since it does not have a 32K crystal so it uses its 26MHz crystal in backup state [13:44] ok, but should be the same software wise [13:44] 7Q turns TCXO off and uses 32K fork crystal [13:44] yeah [13:45] I can't help myself to first try with EXTINT ;-) [13:46] 7C can go lower in Vdd [13:46] New vehicle on the map: 03KB1KVR - 12https://tracker.habhub.org/#!qm=All&q=KB1KVR [13:46] yep, no problem, at night no GPS but only TX [13:48] PE2BZ, biggest pitfails are: 1/ configure the radio switch 2/ configure the PA to not draw more than 45mA at 14dB. In fact, the module is not very well optimized for 14dB [13:48] in terms of power / consumption [13:50] if you really need minimum current you can use limitPeakCurr in UBX-CFG-PM2 [13:50] it works in both PSM and continuous mode [13:50] Do you think that can be a substitute for back up mode? [13:50] saves you about 2-3mA [13:50] no! [13:50] ok [13:51] but if you are near the limit it mihgt help [13:51] Ok, I don't think I am really current limited at day. Only at night during which i don't need the GPS so only need a way to switch it off [13:52] nothing comes close to backup mode short of cutting the power [13:52] backup mode should be about 200-300uA [13:53] cutting the power is not a good solution because initial startup current is higher than when you come out of backup [13:53] ok, I don't feel so bad about removing this MOFSET I had in the design at first ;-) [13:54] New position from 03icspace26-hab-eu-863-870 after 0317 hours silence - 12https://tracker.habhub.org/#!qm=All&q=icspace26-hab-eu-863-870 [13:54] I will try EXTINT and software control with Ublox center. I'll report here when it works! [13:58] PE2BZ, let me know it you need some help with the Lora E5. I can drive you through the step I took. [14:03] New position from 03KD2FOU-11 after 0317 hours silence - 12https://tracker.habhub.org/#!qm=All&q=KD2FOU-11 [14:04] New vehicle on the map: 03W5LCY-7 - 12https://tracker.habhub.org/#!qm=All&q=W5LCY-7 [14:05] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) left irc: Remote host closed the connection [14:08] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) left irc: Quit: Client closed [14:09] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) joined #highaltitude. [14:15] New position from 03SQ6TW-4FSK after 037 days silence - 12https://tracker.habhub.org/#!qm=All&q=SQ6TW-4FSK [14:15] Trieste (T@user/pilgrim) left irc: Ping timeout: 250 seconds [14:23] New vehicle on the map: 03SPVKZ-13 - 12https://tracker.habhub.org/#!qm=All&q=SPVKZ-13 [14:31] snakedGT (~snaked@user/snaked) joined #highaltitude. [14:35] snaked (~snaked@user/snaked) left irc: Ping timeout: 252 seconds [14:36] New vehicle on the map: 03KD5GOM-11 - 12https://tracker.habhub.org/#!qm=All&q=KD5GOM-11 [14:50] New position from 03NOB9 after 0316 hours silence - 12https://tracker.habhub.org/#!qm=All&q=NOB9 [15:01] YO9GJX (~YO9GJX@109.100.112.132) joined #highaltitude. [15:30] New vehicle on the map: 039V1UP-11 - 12https://tracker.habhub.org/#!qm=All&q=9V1UP-11 [15:30] SQ3XBD (~SQ3XBD@85.128.1.13) left irc: Quit: Client closed [15:38] Nick change: snakedGT -> snaked [16:04] New vehicle on the map: 03KC3SKT-11 - 12https://tracker.habhub.org/#!qm=All&q=KC3SKT-11 [16:52] New vehicle on the map: 03SP5YAM - 12https://tracker.habhub.org/#!qm=All&q=SP5YAM [16:53] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) left irc: Ping timeout: 256 seconds [16:57] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) joined #highaltitude. [16:58] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) left irc: Quit: Client closed [17:05] Guest27 (~Guest27@user-5-173-16-21.play-internet.pl) joined #highaltitude. [17:06] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) left irc: Ping timeout: 240 seconds [17:06] Guest27 (~Guest27@user-5-173-16-21.play-internet.pl) left irc: Client Quit [17:11] OK1MDX (~OK1MDX@ip-37-188-172-139.eurotel.cz) joined #highaltitude. [17:19] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) joined #highaltitude. [17:30] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) joined #highaltitude. [17:37] New vehicle on the map: 03KI7CUX-11 - 12https://tracker.habhub.org/#!qm=All&q=KI7CUX-11 [17:37] New vehicle on the map: 03KI7CUX_chase - 12https://tracker.habhub.org/#!qm=All&q=KI7CUX_chase [17:43] New vehicle on the map: 03DC2EH-6 - 12https://tracker.habhub.org/#!qm=All&q=DC2EH-6 [18:05] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) left irc: Ping timeout: 252 seconds [18:06] aOf (~DarkoAOF@95-178-159-78.dsl.optinet.hr) left irc: Ping timeout: 245 seconds [18:10] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) joined #highaltitude. [18:11] New vehicle on the map: 03IZ17 - 12https://tracker.habhub.org/#!qm=All&q=IZ17 [18:18] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) left irc: Ping timeout: 245 seconds [18:22] OK1MDX (~OK1MDX@ip-37-188-172-139.eurotel.cz) left irc: Quit: Client closed [18:28] _9A7AOF (~DarkoAOF@95-178-159-78.dsl.optinet.hr) left irc: Remote host closed the connection [18:29] New vehicle on the map: 03IZ - 12https://tracker.habhub.org/#!qm=All&q=IZ [18:34] New vehicle on the map: 03IZ19 - 12https://tracker.habhub.org/#!qm=All&q=IZ19 [19:01] PE2BZ (~pe2bz@141.224.228.75) left irc: Quit: Leaving [19:01] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) joined #highaltitude. [19:28] es5nhc (~es5nhc@static-213-100-139-88.cust.tele2.ee) left irc: Ping timeout: 252 seconds [19:29] snaked (~snaked@user/snaked) left irc: Quit: Leaving [19:30] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) joined #highaltitude. [19:58] New position from 03NOB10 after 0320 hours silence - 12https://tracker.habhub.org/#!qm=All&q=NOB10 [21:02] snaked (~snaked@user/snaked) joined #highaltitude. [21:31] happysat (~katpoep@82-169-224-141.biz.kpn.net) left irc: Remote host closed the connection [21:35] happysat (~katpoep@82-169-224-141.biz.kpn.net) joined #highaltitude. [21:40] New position from 03N0MPM-13 after 0316 hours silence - 12https://tracker.habhub.org/#!qm=All&q=N0MPM-13 [21:45] vincentsan (~vincentsa@212-198-230-5.rev.numericable.fr) left irc: Quit: Client closed [23:01] LazyLeopard (~irc-clien@chocky.lazyleopard.org.uk) left irc: Quit: Textual IRC Client: www.textualapp.com [23:07] snaked (~snaked@user/snaked) left irc: Quit: Leaving [23:41] New position from 03N4XWC-1 after 039 hours silence - 12https://tracker.habhub.org/#!qm=All&q=N4XWC-1 [00:00] --- Sun Sep 5 2021